teacher’s notes
student’s notes
iron(III) compounds in rocks and that this causes rocks to take on a darker ‘rusty’ colour.
Iron(III) hydroxide gel can be made by adding a few drops of 0.1mol dm
-3
sodium
hydroxide solution to a solution of iron(III) chloride.
If pale sand is used to start with the ‘sandstone’ formed will be much darker when Fe
3+
ions are present. This is similar to the conditions prevailing when this type of red
sandstone was formed 350 million years ago. The point that could be brought out is that
the conditions at the time of deposition affect the nature of the rock formed (but this is
really for students 14 to 16).
Answers to questions
Q 1. Mudstone or shale (shale is a mud-rock with very closely spaced layers in it:
mudstone is more ‘chunky’).
Q 2. When sediments are placed under pressure (by other sediments above them),
any water or air is squeezed out. Mud contains a lot of water - when all of this is
squeezed out, the particles that remain will have been greatly compressed. Sand
grains hold less water between them than mud particles. When the sand is
compressed there is less water to squeeze out and so the overall volume of the
sediment will not be reduced so much.
Q 3. Sandstone B is best. Acid rain would attack the calcium carbonate cementing
agent in sandstone A and this would cause weakness in any building made from
it.
Sedimentary rock from sand:
syringe simulation: teacher’s notes
Level
This activity is designed for students aged 11 to 14.
Topic
This activity is aimed at teaching students about the formation of sedimentary
rocks.
Description
Students use syringes to make samples of sedimentary rock from sand both with and
without cementing agents.
Context
Students may already know about weathering, erosion and the transport of small
solid particles. They may appreciate the idea that settling of sediments can lead to
the formation of a group of rocks called sedimentary rocks. They may have shaken
a container containing grains of different sizes in water and watched them settle at
different rates. They should already be able to state different ways in which rocks can
break down into small particles.
At the end of the activity they should appreciate how deposition of rock fragments,
followed by pressure and cementation, over thousands of years, can result in the
formation of sedimentary rock. The example used is the formation of sandstone, but
similar principles apply equally to the formation of limestones, conglomerates and
other sedimentary rocks.
Teaching points
Students may quickly appreciate that if things are buried very deeply in the Earth
then they will be under a lot of pressure. They may even think that this will be enough
to stick small solid particles into a rock. The key idea that should emerge from this
activity is the need for something to ‘glue’ or ‘cement’ the particles together. Pressure
alone is not normally sufficient. It should be possible to see how the name of a
sedimentary rock is related to the names of the sediments that form them.
You should find that the sample made only from damp sand just crumbles away
almost as you pick it up. Emphasise that this has nothing in it to cement the grains
together. The most rock-like will be the one made with plaster of Paris.
It is also possible to try cementing agents such as sugar or salt water. Students
may see sugar as ‘sticky’ and imagine it as ‘glue’. A suggestion of using salt water
should be taken seriously.
(Sodium chloride is not found as a cementing agent in reality. This is because of its
solubility which allows it to be washed out. The main cementing substances are
calcium carbonate, iron hydroxides and silicon(IV) oxide which, once precipitated
around the sand grains, usually remain insoluble.)
Sedimentary rocks often form at the bottom of seas and so it is just the dissolved
substances in the seawater that are available as cementing agents. The cementing
agents in sedimentary rocks must have formed from minerals that crystallise from
solutions that were around the particles. Pressure squeezes out the water (or air) and
leaves the cementing particles behind.